How to Clean the CFC 2.0

Cleaning and Maintenance Guide

Within this blog today we’ll be teaching you how to clean your CFC 2.0! So grab some isopropyl alcohol, the tools that came with your unit, some cotton swabs or cleaning rags. Now, let’s get started!

First, make sure our vaporizer is turned off and the oven is cool before we start the cleaning process.

Disassemble the CFC 2.0 for Cleaning

The next thing we’re going to do is disassemble our CFC 2.0. We can do this by simply removing the mouthpiece and setting it aside.

Brush Out the Chamber

Next we’re going to take our handy brush tool that comes with the kit and use it to sweep out any remaining herb that might be leftover from previous sessions. We’re just going to take it all the way around the inside of the oven to gently dust everything out. If you see any plant material left over at this point you can just go ahead and flip your unit upside down and lightly tap the sides.

Cotton Swab to the Oven

If you’re getting any issues with stickiness in there, take a cotton swab, dip the end in isopropyl alcohol, and gently go around the inside of the oven; being sure not to leave behind any cotton fibers in the chamber.

Time to Replace the Screen?

We’re also going to check here to see if the screen at the bottom of our oven needs to be replaced. If the answer is yes, you can go ahead and take that out, set it to the side, and then put the replacement screen back in once we’ve cleaned anything that may have accumulated around or behind the screen in the bottom of the oven.

Cleaning the CFC 2.0 Mouthpiece

Now we’re going to set the main body aside and pick up the mouthpiece.

Once we’ve gotten all the leftover flower out of the mouthpiece with our brush tool again, we’re going to take some isopropyl alcohol and cotton swabs and run over the inside and outside of the mouthpiece. You can do this with either a paper towel, cottonettes, a washable microfiber cloth, or whatever you might have.

Next we’re just going to gently go around with your rag inside and outside of the mouthpiece. This should all be a fairly easy process if you’re cleaning your CFC 2.0 regularly; if not, feel free to go over your mouthpiece with alcohol a few times until there is no residue left.

Slow and steady wins the race. Be sure to take note if it’s time to replace our screen in the mouthpiece too. If so, go ahead and swap that screen out for a new one after we clean the space where the screen sat and the gasket around it.

Cleaning with Isopropyl Alcohol

Lastly, let’s take a cloth, get it damp with some isopropyl alcohol. Then, very gently rub down the outside of the main body of our CFC 2.0. This is really important when we’re taking it out on adventures, we’re throwing it in our purse or our pocket. At point everything will get sticky when we’re seshing. It’s good to wipe the outside off now and then just to make sure it’s all staying clean. And bonus points for keeping our hands clean too. Finally, let’s make sure that we’re not leaving behind any cotton fibers inside or around the CFC 2.0.

That’s how you clean the CFC 2.0. All that’s left to do now is fill it up with herb, put the mouthpiece or WPA on, and press the home button five times to turn on our freshly cleaned herbal vaporizer. Pick your favorite temperature and once it heats up, that means it’s time to relax and enjoy!

Watch the Video