HOW TO USE THE CFC 2.0

The CFC 2.0 has an improved and amplified design with a revolutionized airflow upgrading your experience from the CFC LITE. The device is ultra-discreet, compact, and lightweight, making this an ideal device for on-the-go use. Throughout this blog, we’ll be going over the different ways how to use your CFC 2.0. 

Boundless CFC 2.0 Tips & Tricks

Before we get into how to use it, we’ll be going over some quick tips and tricks for your convenience. 

Once you’ve fully charged your unit, you’re ready to sesh. In order to turn your unit on and off, you’ll need to press the power button five times rapidly. After you’ve turned on the power, it should automatically start heating up. 

If you’d like to cycle from Celsius to Fahrenheit, you can do so by simply pressing the up and down buttons at the same time. The up and down buttons are also used to adjust the temperature setting. 

Using the CFC 2.0

Now that we’ve gone over a few tips to get the most out of your CFC 2.0, you’re ready to use it! 

Loosely Pack

Be sure to load your unit before turning it on to avoid accidentally touching the hot oven. 

Once you’ve grabbed your herb of choice and loosely ground it up, you will then remove the mouthpiece and insert the ground herb in the oven. The key thing is to also not overpack the bowl with ground flower so there is some airflow throughout the oven. After you’ve placed the herb into the oven, you will then need to place the mouthpiece back on and turn on your unit.

Power It On

As we mentioned above, once you’ve pressed the power button five times to turn it on, your unit will begin heating the oven. Be sure to select your desired temperature by moving the up and down button to your preference. 

Hitting the CFC 2.0

The flower bowl icon on the screen will illuminate once your oven has heated to your selected temperature. We recommend vaping with your unit around 385-400F. The unit can go up to 446F which will produce much larger clouds but you won’t get the same benefits from your herb.

A slow and steady inhale tends to create the best consumption experience. However, the CFC 2.0 has a powerful heater that can produce vapor with short, harder draws as well; especially through the water pipe if you own a WPA! 

Once your five-minute session has ended, it will automatically start cooling down, but will remain on until you press the power button five times. You can also stop your session at any time by holding the power button down for 3 seconds and it will automatically start cooling down but remain on until you press the power button five times. 

In our next blog post, we’ll be going over How to Clean the CFC 2.0. Be sure to let us know if you have any questions in the comments down below. Also, if you haven’t already grabbed your own, be sure to buy a CFC 2.0 for now 20% OFF through April 14th!