HOW TO CLEAN THE VEXIL

Cleaning and Maintenance Guide

Today we will teach you how to clean your all-new Vexil vaporizer. Grab some cotton swabs, isopropyl alcohol, cleaning tools, and anything else you might need in order to clean your Vexil.

Disassemble the Vexil for Cleaning

Before we begin, the first thing we’re going to want to do is disassemble our Vexil. All we need to do in order to do that is simply remove the mouthpiece from the unit. It’s that easy.

Brush Out the Herb Chamber

We’ll begin by cleaning the inside of the oven of our Vexil. Take our cleaning brush and gently begin brushing the inside of the oven. This shouldn’t be too hard to do since we’re just removing any residual herb that might be leftover from previous sessions. You shouldn’t have to work too hard on getting leftover residue out. Just make sure you’re being thorough.

Replacing the Vexil Screens

Has it been a while since you’ve replaced your screen? This is a great time to pop it out for further cleaning and replacement. Once you’ve scrubbed the oven for a sufficient amount of time, we’re going to tip it upside down and tap out any excess herb that might have been left behind. If it’s been a while since you’ve last cleaned your rig, you might need to do this a few times. You can grab replacement screens for the Vexil anytime from our website. 

Cleaning with Isopropyl Alcohol

Next, we’ll begin cleaning our unit with some isopropyl alcohol and some cotton swabs. No need to over-soak the cotton swabs or pour alcohol directly into the Vexil. If it’s been a minute since you’ve cleaned your bowl, this might take a few passes with your cotton swabs before you see any results. Slow and steady wins the race here. But we still don’t want to leave behind any cotton fibers. 

Brushing and Wiping the Mouthpiece

Now that we’ve completely cleaned the bowl, we’re going to move on to the mouthpiece. This is also a great time to let the bowl dry out so you don’t taste any alcohol during your next sesh. Now we’re going to clean our mouthpiece, and again we’re going to want to start with our brush and gently clean it. It’s best if you do this over a trash can, so any excess herb that is left behind doesn’t end up on the floor or table top. And now we’re just going to tap it over our trash can to remove any excess material that might be left behind again.  

Then we’re going to do the same thing that we did with the bowl and start cleaning the mouthpiece with some isopropyl soaked alcohol cotton swabs. Again, just gently moving them around, getting any excess residue that might be left behind from previous sessions. Everything should now be sufficiently clean after going over it a few times. Also, be sure to give the exterior and buttons a good rub down too, to not only sanitize, but also get off any grime from previous sessions. Don’t feel you need to scrub the unit, but if any gunk has built up, sometimes a cotton swab can be useful for getting in any crevasses or the sticky stuff! 

That’s How to Clean the Vexil Vaporizer

At this point, you’ll want to let your unit dry out before seshing again. If you removed your screens this would also now be the perfect time to put some fresh ones in now that our Vexil is all clean. Once it’s all dried out, load that unit up and enjoy!